Build Your Own Super-Strong Shelves

When building a shelving unit or bookshelf that will need to hold a great deal of weight (for instance, a bookcase that holds a series of very heavy books like law books or a set of encyclopedias), a single 3/4" shelf constructed out of plywood or a single 1x12 board will likely be prone to sagging over time. Fortunately, if you plan ahead for dealing with such weight, there are a couple of simple solutions to prevent the problem.

More woodworking tips & plans here

Build a Tapering Jig

Using the Tapering Jig

Next, place the right-hand side of the jig against your table saw fence, then adjust the position of your fence so that you're cutting the taper at the desired width.

Hold the board against the jig and the jig against the fence and slide the entire apparatus through your saw blade. You should end up with a consistent, cleanly tapered board!

More on woodworking tips & Plans, visit here

Build an Under-Window Bookcase

The first step to building this bookshelf is to cut the two shelf standards, the vertical pieces on each side of the bookshelf. Using a Table Saw or Circular Saw, cut two pieces of 3/4" plywood 12" wide x 28-1/4" high. Set these two pieces aside for the moment.

Next, you'll need to cut the three shelves. The top and bottom shelves are cut to 12" x 47", whereas the center shelf will be cut to 11-3/4" x 47".

Finally cut one piece to 12" x 48". This will be the top of the unit, and will sit above the top shelf. Set this piece aside for the time being, as you won't need it until step 5.

More on woodworking tips & Plans, visit here

Woodworking Projects – How to Plan and Build Them

As we all know the importance of proper woodworking projects planning and build up of any plan that we have to implicate and computer and internet has now became the important joyrides to complete this planning and build up.

When the things come to Woodworking Projects, planning has the same appreciation as that of in the other things. Initially when any one concoct about the woodworking projects, the ways left behind for him was only to find the books and magazines from which any information about the planning of plan could be assembled down. But now the things have changed as you just have to type the things and you can get lots of woodworking plans on your fingertips in just few minutes.

But even after lots of availability you just have to be careful about the plans that you are going to work upon as all the woodworking plans cannot be the same. When you like some Woodworking Project just enable yourself to the things that are accessible for the plan. Most of the people start the plan without considering the things that have to be assembled for the Woodworking Project as poor consideration always lead to failure. Having a poor base for the Woodworking Project leads to recollection of all the information and restarting of the plan. So it would be better to collect these all before the beginning.

Exploring my personal experience, I was amazed at first to see thousands of plans available for the Woodworking Projects but having a worst beginning with most of them I found myself turned off. Then I choose a plan with all the information like diagrams, material list, tool list and the step by step procedure that is to be followed. I have explored all the woodworking projects that are available on internet that most of the men required.

Firstly I tried myself with some plans that were easy to accomplish some Woodworking Project and then after gaining some confidence I gave a look on the tougher ones. There are about 16000 woodworking plans available about Woodworking Projects on the internet and are accessible on all the themes like making a table to make a well furnished tree house with all equipments.

It does not matter who are you and what is your work or does your work has any relation with woodworking projects, you should give yourself a try at least but it should be done with proper planning.

More on woodworking plans & projects

Build an Under-Window Bookcase

A bookcase is a terrific project for woodworkers of all abilities. Building a bookshelf employs many of the same techniques used when building cabinets, but adds a number of moldings that not only dress out the bookcase, it requires a level of precision that will greatly enhance the woodworker's skill level.

With these free woodworking plans, you'll build a bookshelf designed to fit under a window sill. You can make the bookcase out of any type of wood you choose, but the most popular will be to use oak or pine. The bookcase displayed in the pictures on the following pages was made using birch plywood with pine moldings.

Difficulty Level
Woodworking: ModerateFinishing: Paint or stain optional
Time to Complete
5-6 Hours
Recommended Tools
Miter Saw or Circular SawTable Saw or Radial Arm Saw with Dado SetBand Saw or JigsawCordless or Corded Power DrillClaw HammerLayout Square
Materials Needed Two (2) 4x8 Sheet Sanded 3/4-inch Birch or Oak PlywoodOne (1) 2x4 Sheet 1/4-inch PlywoodOne (1) 1x4 8-feet long (Oak or Pine)Two (2) 3/4" Cove Molding 8-feet long (Oak or Pine)One (1) 3/4" Quarter Round Molding 8-feet long (Oak or Pine)One (1) Screen Molding 8-feet long (Oak or Pine)1 inch Wood Screws4d Finish NailsTape MeasurePencilCompass or 3" diameter Circle for markingWoodworker's GlueStainable Wood FillerSandpaper

The Finest Woodworking Plans Are Found By Clicking Here.

How to Build Utility Shelves

Utility Shelf

Whether you need them in the garage, laundry room, wood shop, utility room, pool house or wherever else you can imagine, utility shelves are incredibly useful. However, there is a lot more to building a strong and yet aesthetically-pleasing utility shelf than attaching some wood to a couple of shelf standards.

Who says utility shelves have to be ugly?Difficulty Level
Woodworking: EasyFinishing: Paint or Stain (and Polyurethane)
Time to Complete
1-2 Hours
Recommended Tools
Miter SawCircular Saw or Table SawPower DrillPlate Joiner with #10 biscuits
Materials Needed 1 - 1x2 x 8 SPF Lumber1 - 16" x 4' piece of 3/4" sanded (AC) plywoodTape MeasureLevelPencil2 - Metal shelf brackets with screws and anchors (if needed)#8 - 5/8" Wood ScrewsWood FillerWoodworking GluePaint or Stain (and Polyurethane)Sandpaper

The Finest Woodworking Plans Are Found By Clicking Here.

How to Build Cabinets

Finished Utility Cabinet

(c) 2006 Chris Baylor licensed to About.com, Inc.Whether you need kitchen cabinet plans or some utility cabinets for your workshop, the basics of cabinet design remain the same. Cabinets consist of little more than a well-built plywood box, called a carcase, that is then trimmed with doors or wood trim appropriate for the application. The carcase is typically made from 3/4" plywood with dadoes or rabbets to hold some of the shelves and backing.

This project will walk you through building a single utility cabinet, but comments will be added when minor modifications for kitchen cabinetry are appropriate. This cabinet will be 48-inches wide, 24-inches tall (with a center and bottom shelf) and 18-inches deep. You may modify the dimensions to fit your particular installation as necessary.

Difficulty Level
Woodworking: ModerateFinishing: Paint or stain optional
Time to Complete
3-4 Hours per cabinet
Recommended Tools
Miter Saw or Circular SawTable Saw with Dado Set or RouterCordless or Corded Power DrillClaw HammerLayout Square
Materials Needed Two (2) 4x8 Sheet 3/4-inch BC PlywoodOne (1) 4x8 Sheet 1/4-inch PlywoodOne (1) 2x4 8-feet longThree (3) 1x2 8-feet long3 inch and 1-1/2 inch Deck Screws4d Finish NailsTape MeasurePencilWoodworker's Glue

The Finest Woodworking Plans Are Found By Clicking Here.