Particle Board

Take a walk through most furniture stores today and you'll see truckloads of beautifully finished hardwood furniture. Cherry, oak, maple and many other varieties of stock. However, if you take a closer look at any of these pieces, you may notice that it likely isn't made from hardwood at all. Instead, the piece is most likely made from veneered particle board.

Why would furniture companies use a manufactured wood product simulated to look like hardwoods?

Does this mean that you should avoid using particle board in your woodworking projects?

Absolutely not.

As with all manufactured wood products, there is a proper time and place for using particle board products. For instance, white, melamine covered particle board is well-equipped for use in interior tasks such as building closet shelves. The melamine is clean and doesn't require painting, and if affixed properly, will be stable and strong for a long time. I have used melamine coated particle board for numerous shop projects, and it holds up quite well.

Are there any special steps that are required when using particle board?

For starters, a regular screw or nail that is driven directly into particle board will not hold very well. For connecting two pieces of particle board, use adhesives and specially-designed screws for holding particle board.

Second, the veneer or melamine covering on the particle board can chip when cutting with a circular saw. To combat this chipping, try scoring the particle board with a utility knife along the cut line. You might also try covering the cut line with masking tape before making the cut.

The Finest Woodworking Plans Are Found By Clicking Here.